Wed, 25 Jun 2008 19:48:00 GMTI finally realize that I'm a poethttp://item.feedsky.com/~csdn.net/ramacess/~1052130/87545089/1052130/1/item.htmlcomments/2586765.aspx0comments/commentRss/2586765.aspxhttp://tb.blog.csdn.net/TrackBack.aspx?PostId=2586765由于移动硬盘是一个非标准的USB设备，使用中远不像鼠标等小型USB设备可靠，问题也较多，因此多了解一下相关的使用方法还是非常有必要的。<br /><br />　　接下来将就移动硬盘常见的多发情况和大家作一下交流。<br /><br />　　经验分享：<br /><br />　　1、尽量不要选购过于廉价的产品，因为价格将决定移动硬盘盒的用料情况，而用料过于简省则无法保证移动硬盘的稳定运行，为将来应用带来隐患，建议大家多考虑做工优秀且有品质保证的产品。<br /><br />　　2、移动硬盘分区最好不要超过2个，否则在启动移动硬盘时将会增加系统检索和使用等待的时间。使用Full Speed USB2.0(以前称USB1.1)传输接口的用户更应忌讳，否则将浪费掉许多宝贵的时间。<br /><br />　　3、使用用料一般的移动硬盘盒，最好不要插在电脑上长期工作，移动硬盘是用来临时交换或存储数据的，不是一个本地硬盘。相比于内置硬盘会时刻都工作在恶劣的环境下，应该尽量缩短工作时间。如果有需要转存下载资料的，正确的使用方法是使用本地硬盘下载和整理资料等，然后copy到移动硬盘上,而不要在移动硬盘上<img src ="aggbug/2586765.aspx" width = "1" height = "1" />Thu, 26 Jun 2008 03:48:00 +0800ramacesshttp://blog.csdn.net/ramacess/archive/2008/06/25/2586765.aspx#Feedbackhttp://blog.csdn.net/ramacess/archive/2008/06/25/2586765.aspxramacesshttp://blog.csdn.net/ramacess/archive/2008/06/25/2586765.aspxhttp://blog.csdn.net/ramacess/rss.aspxcsdn.net/ramacess/~1052130/87545089/1052130http://item.feedsky.com/~csdn.net/ramacess/~1052130/87545090/1052130/1/item.htmlcomments/2543052.aspx0comments/commentRss/2543052.aspxhttp://tb.blog.csdn.net/TrackBack.aspx?PostId=2543052傻瓜型的，推荐Meld和beediff，Guiffy<img src ="aggbug/2543052.aspx" width = "1" height = "1" />Fri, 13 Jun 2008 19:53:00 +0800ramacesshttp://blog.csdn.net/ramacess/archive/2008/06/13/2543052.aspx#Feedbackhttp://blog.csdn.net/ramacess/archive/2008/06/13/2543052.aspxramacesshttp://blog.csdn.net/ramacess/archive/2008/06/13/2543052.aspxhttp://blog.csdn.net/ramacess/rss.aspxcsdn.net/ramacess/~1052130/87545090/1052130http://item.feedsky.com/~csdn.net/ramacess/~1052130/87545091/1052130/1/item.htmlcomments/2539996.aspx0comments/commentRss/2539996.aspxhttp://tb.blog.csdn.net/TrackBack.aspx?PostId=2539996没有别的办法，知识性的<img src ="aggbug/2539996.aspx" width = "1" height = "1" />Thu, 12 Jun 2008 23:15:00 +0800ramacesshttp://blog.csdn.net/ramacess/archive/2008/06/12/2539996.aspx#Feedbackhttp://blog.csdn.net/ramacess/archive/2008/06/12/2539996.aspxramacesshttp://blog.csdn.net/ramacess/archive/2008/06/12/2539996.aspxhttp://blog.csdn.net/ramacess/rss.aspxcsdn.net/ramacess/~1052130/87545091/1052130http://item.feedsky.com/~csdn.net/ramacess/~1052130/87545092/1052130/1/item.htmlcomments/2504612.aspx0comments/commentRss/2504612.aspxhttp://tb.blog.csdn.net/TrackBack.aspx?PostId=2504612<p><font size="3">原来的账户不知道怎么搞的，资源管理器的许多设置混乱了，但是许多软件的设置也在里面，又不能删掉，所以一直不知道怎么办。今天实在忍不住了，尤其是在对话框里竟然没有使用频率最高的“我的文档”的快捷方式，于是动武了先新建一个帐户CJW-SECOND，然后打算用“文件设置和转移”来弄，结果从文件大小上看似乎不奏效。于是干脆删掉了原来的CJW（“计算机管理”里），目录仍然保留，接着再创建一个CJW，重新登录。结果新的CJW并不能利用原来的CJW目录，二是新建了一个CJW.FOUNDER以示区分。怀疑之下，重新启动，重新操作多次还是无法启用原来的CJW目录。于是把原来的CJW目录改成CJW--，然后再次操作，还是不行。后来又在网上找到该注册表的方式：</font></p><p><font color=#9acd32 size=3>&nbsp;<font size="2">XP缺省的用户配置文件目录是C:\Documents And Settings\&lt;user&gt;，下面一般放特定用户的各种配置文件，比如Internet临时文件，cookie文件，等等。但<img src ="aggbug/2504612.aspx" width = "1" height = "1" />Tue, 03 Jun 2008 04:46:00 +0800ramacesshttp://blog.csdn.net/ramacess/archive/2008/06/02/2504612.aspx#Feedbackhttp://blog.csdn.net/ramacess/archive/2008/06/02/2504612.aspxramacesshttp://blog.csdn.net/ramacess/archive/2008/06/02/2504612.aspxhttp://blog.csdn.net/ramacess/rss.aspxcsdn.net/ramacess/~1052130/87545092/1052130http://item.feedsky.com/~csdn.net/ramacess/~1052130/87545093/1052130/1/item.htmlcomments/2500012.aspx0comments/commentRss/2500012.aspxhttp://tb.blog.csdn.net/TrackBack.aspx?PostId=2500012[from:http://www.gaoang.com/]<br /><a href="http://phun.cs.umu.se/wiki/phun">Phun</a>源自于瑞典UMU大学硕士生的毕业论文，可以模拟物体的各种物理运动规律。使用者可以通过鼠标绘图来创建物体，并让物体实验重力、摩擦力、弹力、加速度等等不同的物理规律。<p>C++编写的Phun使用了<a href="http://www.opengl.org/">OpenGL</a>、<a href="http://glew.sourceforge.net/">GLEW</a>、<a href="http://www.libsdl.org/">SDL</a>（用于窗口管理）<a href="http://www.libsdl.org/projects/sdl_image/">SDL_image</a>（用于读取图像）以及<a href="http://www.boost.org/">boost</a>等类库，目前Phun提供了Windows和Linux版的免费<a href="http://phun.cs.umu.se/w<img src ="aggbug/2500012.aspx" width = "1" height = "1" />Sun, 01 Jun 2008 07:08:00 +0800ramacesshttp://blog.csdn.net/ramacess/archive/2008/05/31/2500012.aspx#Feedbackhttp://blog.csdn.net/ramacess/archive/2008/05/31/2500012.aspxramacesshttp://blog.csdn.net/ramacess/archive/2008/05/31/2500012.aspxhttp://blog.csdn.net/ramacess/rss.aspxcsdn.net/ramacess/~1052130/87545093/1052130http://item.feedsky.com/~csdn.net/ramacess/~1052130/87545094/1052130/1/item.htmlcomments/2256757.aspx0comments/commentRss/2256757.aspxhttp://tb.blog.csdn.net/TrackBack.aspx?PostId=2256757关键字：[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\MyComputer\NameSpace\DelegateFolders\{59031a47-3f72-44a7-89c5-5595fe6b30ee}] @="" <img src ="aggbug/2256757.aspx" width = "1" height = "1" />Mon, 07 Apr 2008 21:15:00 +0800ramacesshttp://blog.csdn.net/ramacess/archive/2008/04/07/2256757.aspx#Feedbackhttp://blog.csdn.net/ramacess/archive/2008/04/07/2256757.aspxramacesshttp://blog.csdn.net/ramacess/archive/2008/04/07/2256757.aspxhttp://blog.csdn.net/ramacess/rss.aspxcsdn.net/ramacess/~1052130/87545094/1052130http://item.feedsky.com/~csdn.net/ramacess/~1052130/87545095/1052130/1/item.htmlcomments/2246086.aspx0comments/commentRss/2246086.aspxhttp://tb.blog.csdn.net/TrackBack.aspx?PostId=2246086犯的第一个错误：没有编写完整的资源描述文件，notepad_row中没有ListView属性 <img src ="aggbug/2246086.aspx" width = "1" height = "1" />Thu, 03 Apr 2008 07:57:00 +0800ramacesshttp://blog.csdn.net/ramacess/archive/2008/04/02/2246086.aspx#Feedbackhttp://blog.csdn.net/ramacess/archive/2008/04/02/2246086.aspxramacesshttp://blog.csdn.net/ramacess/archive/2008/04/02/2246086.aspxhttp://blog.csdn.net/ramacess/rss.aspxcsdn.net/ramacess/~1052130/87545095/1052130http://item.feedsky.com/~csdn.net/ramacess/~1052130/87545096/1052130/1/item.htmlcomments/2234552.aspx0comments/commentRss/2234552.aspxhttp://tb.blog.csdn.net/TrackBack.aspx?PostId=2234552your content must have a ListView whose id attribute is 'android.R.id.list'<img src ="aggbug/2234552.aspx" width = "1" height = "1" />Tue, 01 Apr 2008 10:14:00 +0800ramacesshttp://blog.csdn.net/ramacess/archive/2008/04/01/2234552.aspx#Feedbackhttp://blog.csdn.net/ramacess/archive/2008/04/01/2234552.aspxramacesshttp://blog.csdn.net/ramacess/archive/2008/04/01/2234552.aspxhttp://blog.csdn.net/ramacess/rss.aspxcsdn.net/ramacess/~1052130/87545096/1052130http://item.feedsky.com/~csdn.net/ramacess/~1052130/87545097/1052130/1/item.htmlcomments/2234550.aspx0comments/commentRss/2234550.aspxhttp://tb.blog.csdn.net/TrackBack.aspx?PostId=2234550your content must have a ListView whose id attribute is 'android.R.id.list'<img src ="aggbug/2234550.aspx" width = "1" height = "1" />Tue, 01 Apr 2008 10:12:00 +0800ramacesshttp://blog.csdn.net/ramacess/archive/2008/04/01/2234550.aspx#Feedbackhttp://blog.csdn.net/ramacess/archive/2008/04/01/2234550.aspxramacesshttp://blog.csdn.net/ramacess/archive/2008/04/01/2234550.aspxhttp://blog.csdn.net/ramacess/rss.aspxcsdn.net/ramacess/~1052130/87545097/1052130http://item.feedsky.com/~csdn.net/ramacess/~1052130/87545098/1052130/1/item.htmlcomments/2222899.aspx0comments/commentRss/2222899.aspxhttp://tb.blog.csdn.net/TrackBack.aspx?PostId=2222899转自bbs.ctex.org上大侠们的叙述，我之前的猜测大抵错了，谁叫我根本就不仔细去调查，没有调查就没有发言权……不过，我还是惦记着那个JIT的想法……<img src ="aggbug/2222899.aspx" width = "1" height = "1" />Thu, 27 Mar 2008 21:48:00 +0800ramacesshttp://blog.csdn.net/ramacess/archive/2008/03/27/2222899.aspx#Feedbackhttp://blog.csdn.net/ramacess/archive/2008/03/27/2222899.aspxramacesshttp://blog.csdn.net/ramacess/archive/2008/03/27/2222899.aspxhttp://blog.csdn.net/ramacess/rss.aspxcsdn.net/ramacess/~1052130/87545098/1052130http://item.feedsky.com/~csdn.net/ramacess/~1052130/87545099/1052130/1/item.htmlcomments/2198419.aspx0comments/commentRss/2198419.aspxhttp://tb.blog.csdn.net/TrackBack.aspx?PostId=21984191、TUG的，Tex User Group，它有三个想法需要人： better unicode compiliance ，要解决双向书写、断字等新问题 texshow overhaul 基于网页的ConTeXt，要进一步完善 MathTrans 基于JavaScript的，将Tex写的数学式子以图片形式显示到网页上，给了一个js例子，是调用服务器上的cgi，只要做一些底层的解析完了——没这么简单吧？？ 2、pidgin，在Linux下用QQ的，它有很多想法需要人： native interface for microsoft windows，原来的windows下的界面太丑，是基于gtk2的。换.Net也可以，只要是更漂亮，前提是使用libpurple XMPP transport ，一种传输协议？？ Yahoo！TLC <img src ="aggbug/2198419.aspx" width = "1" height = "1" />Thu, 20 Mar 2008 06:45:00 +0800ramacesshttp://blog.csdn.net/ramacess/archive/2008/03/19/2198419.aspx#Feedbackhttp://blog.csdn.net/ramacess/archive/2008/03/19/2198419.aspxramacesshttp://blog.csdn.net/ramacess/archive/2008/03/19/2198419.aspxhttp://blog.csdn.net/ramacess/rss.aspxcsdn.net/ramacess/~1052130/87545099/1052130http://item.feedsky.com/~csdn.net/ramacess/~1052130/87545100/1052130/1/item.htmlcomments/2191639.aspx0comments/commentRss/2191639.aspxhttp://tb.blog.csdn.net/TrackBack.aspx?PostId=2191639because PLOT doesn't know how to convert the symobject into a double array for plotting. To correct this, you will need toconvert the sym object into a double array. The easiest way to do this, ifthe expression F does not contain any instances of symbolic variables, is touse double(F). If it does contain symbolic variables, use SUBS tosubstitute values into that expression (and call DOUBLE on that result ifnecessary.) Alternately, the EZPLOT function accepts sym objects and plotsth<img src ="aggbug/2191639.aspx" width = "1" height = "1" />Mon, 17 Mar 2008 21:30:00 +0800ramacesshttp://blog.csdn.net/ramacess/archive/2008/03/17/2191639.aspx#Feedbackhttp://blog.csdn.net/ramacess/archive/2008/03/17/2191639.aspxramacesshttp://blog.csdn.net/ramacess/archive/2008/03/17/2191639.aspxhttp://blog.csdn.net/ramacess/rss.aspxcsdn.net/ramacess/~1052130/87545100/1052130http://item.feedsky.com/~csdn.net/ramacess/~1052130/87545101/1052130/1/item.htmlcomments/2189722.aspx0comments/commentRss/2189722.aspxhttp://tb.blog.csdn.net/TrackBack.aspx?PostId=2189722就是说，express最好带上 Windows SDK！！因为Intel Compiler基本上只是windows compiler toolchain的一个扩展件。<img src ="aggbug/2189722.aspx" width = "1" height = "1" />Mon, 17 Mar 2008 08:02:00 +0800ramacesshttp://blog.csdn.net/ramacess/archive/2008/03/17/2189722.aspx#Feedbackhttp://blog.csdn.net/ramacess/archive/2008/03/17/2189722.aspxramacesshttp://blog.csdn.net/ramacess/archive/2008/03/17/2189722.aspxhttp://blog.csdn.net/ramacess/rss.aspxcsdn.net/ramacess/~1052130/87545101/1052130http://item.feedsky.com/~csdn.net/ramacess/~1052130/87545102/1052130/1/item.htmlcomments/2118065.aspx0comments/commentRss/2118065.aspxhttp://tb.blog.csdn.net/TrackBack.aspx?PostId=2118065解压下载的包，进入GTK直接dpkg -i *.deb这一步报告缺少依赖关系了，全部记下来，apt-get之，再来dpkg，完成menubar的分离。最后dpkg上macmenu，complete<img src ="aggbug/2118065.aspx" width = "1" height = "1" />Mon, 25 Feb 2008 08:11:00 +0800ramacesshttp://blog.csdn.net/ramacess/archive/2008/02/25/2118065.aspx#Feedbackhttp://blog.csdn.net/ramacess/archive/2008/02/25/2118065.aspxramacesshttp://blog.csdn.net/ramacess/archive/2008/02/25/2118065.aspxhttp://blog.csdn.net/ramacess/rss.aspxcsdn.net/ramacess/~1052130/87545102/1052130http://item.feedsky.com/~csdn.net/ramacess/~1052130/87545103/1052130/1/item.htmlcomments/2085591.aspx0comments/commentRss/2085591.aspxhttp://tb.blog.csdn.net/TrackBack.aspx?PostId=2085591most useful link： http://study.czn.com.cn/more.asp?lm_first_id=2007631537<img src ="aggbug/2085591.aspx" width = "1" height = "1" />Wed, 06 Feb 2008 22:46:00 +0800ramacesshttp://blog.csdn.net/ramacess/archive/2008/02/06/2085591.aspx#Feedbackhttp://blog.csdn.net/ramacess/archive/2008/02/06/2085591.aspxramacesshttp://blog.csdn.net/ramacess/archive/2008/02/06/2085591.aspxhttp://blog.csdn.net/ramacess/rss.aspxcsdn.net/ramacess/~1052130/87545103/1052130