laserengraver的专栏

Laser industry development trend analysis

laserengraver — Thu, 04 Mar 2010 15:03:00 +0800

The development of the world laser industry by region can be divided into the United States, Europe, Japan and the Pacific region. U.S. market share of about 55 percent, accounting for about 22 percent in Europe, Japan and the Pacific region accounted for about 23 percent. Following the 500-watt, low-power laser is the advantage the United States, more than 500 watts for material processing of high-power laser is the German-dominated, and low-power laser diode is dominant in Japan, accounting fo

Clean the reflector and focusing mirror

laserengraver — Thu, 04 Mar 2010 15:02:00 +0800

1.Filling lubricating oil to linear guide
As we know, the smoke and dust which is generated by the engraving and cutting will harm the guide rail after a period of usage, so we need to do the daily maintenance of the guide rail.
Please turn off the laser engraving machine and cut the power, clean the guide rail with clean mull, then please drop the lubricating oil on the guide rail, try to move the slide rod and make sure that the oil comes into it. Make the slide rod move on the guide

Maintenance Manual of the Laser Engraving Machine

laserengraver — Sat, 20 Feb 2010 16:31:00 +0800

The critical technologies of CO2 laser cutting machine

laserengraver — Sat, 20 Feb 2010 16:29:00 +0800

The critical technologies of the CO2 laser cutting machine are Light, Machine, Electric integrative Synthesis Technique.
For the CO2 laser cutting machine he Paramater of the laser bean, machine and the performance of the numerical controls will direct influence the efficiency and the quality of the laser cutting. Especially for cutting high precision and thick components.It needs to grasp and solve the following critical technology:

1. The control technique of the f

Machine laser engraving machine of choice 5 points

laserengraver — Thu, 04 Feb 2010 12:06:00 +0800

First, the size of the choice of format
Customers should be based on business needs and financial situation, to choose their own engraving machine and the power of the model size. General small-format sculpture machine has 600mm × 600mm and 600mm × 900mm, the feed width is 700mm. Carving is a small-format two-color board engraving machine the most basic application, acceptance is very good. Then smaller engraving machine price with similar, but the color board when carving cutti

How to test the capacity of CNC engraving machine?

laserengraver — Thu, 04 Feb 2010 12:03:00 +0800

With the computer engraving machine identified in the ad industry, the popularity of the application surface, computer engraving machine is no longer just a symbol of strength, only to become a real bulk type of professional production tools.

Computer Engraving Machine logo in the ad industry, typical applications include: badge processing, cut crystal character, carving three-dimensional characters, making sand table parts, processing and light box components, processin

Laser technology in railway industry six applications

laserengraver — Thu, 28 Jan 2010 16:19:00 +0800

Because of the uneven surface rolling, rail need to grinding, polishing requirements on the rails remove hardened parts to reduce cost convex. A large rail manufacturing enterprise application non-contact measuring system for many years, the online measurement orbit surface and minimum and maximum values of data acquisition software, and touched like manual measuring results show that the long-term compare two measurement results for maximum deviation only 0.05 mm. In addition, track surfa

Quick master laser engraver machines FAQ maintenance techniques

laserengraver — Thu, 28 Jan 2010 16:16:00 +0800

Old control box
Laser shake engraving machines

1, no bootable
For many reasons the boot ceased, causes and circuit chip
Chip: 7404 control, namely, reset signal after 7404 chip to other chips.
Circuit boards: small + 5 volts direct contact with no electricity, and no bad or, 4700uf capacitance, not even better, A driver didn't pick good, also disappeared

2, boot don't show that the other, HELLO, difficult to handle change new motherboard.

The use of laser engraver classification and the characteristics of each category

laserengraver — Wed, 13 Jan 2010 20:19:00 +0800

laser engraver can be divided into the following categories:

1. Vector cutting 2. Lattice sculpture 3. Carvings intensity 4. Laser beam spot size. 5. Engraving speed

a. Vector cutting laser engraver features: vector graphic of the cutting is carried out outside the contour line. In the timber, jak tablets, paper and other materials to penetrate the cut surface can also be carried out in a variety of marking operations

b. The lattice laser engraver engrav

Laser engraving machine industry problems and solutions

laserengraver — Wed, 13 Jan 2010 20:16:00 +0800

Large format laser engraving machine control system before the main laser seal machine control program, the program uses microcomputer control, and control circuit and drive circuit made of one. Following major issues: engraving speed is low, only up to 200 mm / sec, processing speed is set too high there will be dislocation phenomena; cutting can only use the uniform cutting, generally only up to 20 mm / sec, and prone to a "sawtooth "; the same time, a relatively high repair rate. Does n